Publicité
Les langues disponibles
Les langues disponibles
How to fill the water tank.
FIG 1
FIG 3
•
Unplug the iron.
•
Set the steam button to dry ironing .(fig.3)
•
Fill the tank through the filling hole.(fig.1, 2)
Do not store the iron with water in the tank.
Do not use chemically de-limed water or perfumed.
If you have hard water ,it is advisable to use only distilled or demineralized water.
Selecting the temperature
•
Check the ironing instructions on the garment to be ironed.
•
If the garment does not have any ironing instructions but you know the kind of fabric in question, use
the chart below.
•
Fabrics that have some kind of finish (polishing, wrinkles, contrasts....) can be ironed at the lowest
temperatures.
•
If the fabric contains several kinds of fibres, always select the temperature applicable ,if an article
contains 60% polyester and 40% cotton ,you must always choose the temperature corresponding to
polyester and without steam.
•
First classify the articles to be ironed according to the most suitable ironing temperature : wool with
wool, cotton with cotton, etc. as the iron heats up as fast as it cools , start by ironing the articles
requiring the lowest temperature such as those made of synthetic fibres. Progress towards those that
require the highest temperatures.
•
Turn the temperature control until it is in front of the appropriate signal according to the following:
·
position for nylon and acetate.
·· position for wool ,silk or mixures.
··· position for cotton or linen (steam).
FIG 2
Publicité
