Horizon Fitness T303 Manuel Du Propriétaire page 13

ASSEMBLY STEP 3
CONSOLE POCKET
SCREWS (E)
CONSOLE
CONSOLE
CONSOLE CABLES
RIGHT CONSOLE MAST
FLAT WASHERS (B)
SPRING WASHERS (C)
BOLTS (F)
HARDWARE FOR STEP 3:
FLAT
SCREW (E)
WASHER (B)
8 mm
8 mm
Qty: 2
Qty: 4
A Open HARDWARE FOR STEP 3.
B Attach CONSOLE POCKETS to CONSOLE using
2 SCREWS (E).
C Gently place CONSOLE on top of CONSOLE
MASTS.
NOTE: Be careful not to pinch the console
cables while attaching the console.
D Connect the CONSOLE CABLES and tuck them
inside the right CONSOLE MAST.
E Connect the CONSOLE to the right CONSOLE
MAST using 2 BOLTS (F), 2 SPRING WASHERS
(C) and 2 FLAT WASHERS (B).
F Repeat STEP E on other side.
SPRING
BOLT (F)
WASHER (C)
15 mm
8 mm
Qty: 4
Qty: 4
13