TWIN NEEDLE (Option)
A twin-needle produces two rows of parallel stitches for pin
tucks, double top stitching and decorative sewing.
Use of a Singer Brand 3mm (Style 2025) Twin Needle is strongly
recommended
THREADING THE TWIN NEEDLE
1. Place a spool on each spool pin. Thread the two threads as
one. Draw one thread through each needle from front to
back.
2. Pick up bobbin thread as for single needle sewing. Pull the
three threads together under the presser foot to the back of
the machine, leaving about 6" (15 cm) clear.
NOTE: Needle threader cannot be used to thread the twin
needle.
Helpful Hints:
1. Always select the Twin Needle Mode prior to selecting
a pattern. This will preclude any possibility of the twin
needle breaking.
2. Turning off the machine returns the machine to normal
sewing mode. Twin Needle is only active when the
Twin Needle Switch is lit red.
STRAIGHT STITCH NEEDLE POSITION
The position of the needle when sewing straight stitch may be
adjusted to anyone of 13 different positions with the Stitch Width
Control as illustrated:
Toward left
Vers la gauche
Hacia izquierda
78
Toward right
Vers la droite
Hacia derecha
Width control
Largeur
Control ancho