Using Automatic Needle Threader - Singer 7426 Manuel D'instruction

Table des Matières

Publicité

USING AUTOMATIC NEEDLE THREADER

Raise the needle to its highest position by rotating the hand
wheel towards you.
1. Hook thread to thread guide as illustrated.
2. Pull down lever holding the end of thread.
3. Turn the lever as far as it will go.
4. Guide thread into hooked end and pull it upward.
5. Return the lever and needle will be threaded automatically.
6. Release the lever and pull thread away from you.
NOTE: For smooth threading it is recommended you
select straight stitching when using the needle threader.
1
4
22
2
5
3
6

Publicité

Table des Matières
loading

Table des Matières