Setting Up Your Machine; Power/Light Switch - Singer 7426 Manuel D'instruction

SETTING UP YOUR MACHINE

Be sure to wipe off any surplus oil from needle
plate area before using your machine the first
time.
POWER LINE CORD/FOOT CONTROL
Connect the plug of the power line cord into
the cord socket (1) and your wall outlet (2) as
illustrated.
Connect the foot control plug (3) into the
machine socket.
NOTE: W h e n f o o t c o n t r o l i s
disconnected, the machine will not
operate.

POWER/LIGHT SWITCH

Your machine will not operate until the power/
light switch is turned on. The same switch
controls both the power and the light.
When servicing the machine, or changing
needles, etc., machine must be disconnected
from the power supply.
10
1
Pin plug
Butée
Pasador
Power/light switch "OFF"
Interrupteur moteur/lumière "OFF"
Interruptor corriente/luz "OFF"
Set power/light switch at
"OFF"
Mettez l'interrupteur moteur/
lumière sur "OFF".
Poner el Interruptor de corriente/
luz de velocidad en "OFF"
Machine socket
Connecteur de la
machine
Conector de la máquina
3
Power line cord
Cordon
Cordón de la linea eléctrica
Foot control
Rhéostat
Control por pedal
Always disconnect the machine from power
supply by removing the plug from the wall-outlet.
Power/light switch "ON"
Interrupteur moteur/lumière "ON"
Interruptor corriente/luz "ON"
2