Before Use; Filling With Water - SOLAC Auto Evolution Sensor CVG9611 Mode D'emploi

ance.
Do not wrap the cable around the appliance.
•
Ensure that the electric cable does not get
•
trapped or tangled.
Do not allow the connection cable to hang free-
•
ly or to come into contact with the appliance's
hot surfaces.
Check the condition of the mains cable. Dam-
•
aged or twisted cables increase the risk of
electric shock.
Do not touch the plug with wet hands.
•
Do not use the appliance if the cable or plug
•
is damaged.
If any of the appliance casings breaks, immedi-
•
ately disconnect the appliance from the mains
to prevent the possibility of an electric shock.
Do not touch any heated parts, as this may
•
cause serious burns.
USE AND CARE:
Fully unroll the appliance's power cable before
•
each use.
Do not use the appliance if the on/off switch
•
does not work.
Do not use the appliance if the on/off switch
•
does not work.
Use the appliance handle/s, to lift or move it.
•
Do not use the appliance at an angle or turn
•
it over.
Do not turn the appliance over while it is in use
•
or connected to the mains.
To keep the non-stick coating in good condi-
•
tion, do not use metal or pointed utensils on it.
Respect the MAX level indicator. (Fig.1)
•
Unplug the appliance from the mains when not
•
in use and before undertaking any cleaning
task.
This appliance is for household use only, not
•
professional or industrial use.
Store this appliance out of reach of children
•
and/or those with reduced physical, sensorial
or mental abilities or who are unfamiliar with
its use
Do not store or transport the appliance if it is
•
still hot.
If the iron is left on at maximum temperature for
•
prolonged periods, this may cause discoloura-
tion, which will not affect appliance operation
in any way.
To ensure that the iron functions correctly,
•
keep the soleplate scratch free and do not use
it on metal objects (e.g. the ironing board, but-
tons, zips...)
The use of distilled water is recommended,
•
especially if the water in your area contains
any type of silt or is "hard" (contains calcium
or magnesium).
Check that the lid is closed properly before
•
switching the appliance on.
Never leave the appliance connected and un-
•
attended if is not in use. This saves energy and
prolongs the life of the appliance.
Never rest the appliance on a surface while in
•
use.
Do not use the appliance on any part of the
•
body of a person or animal.
Do not use the appliance on pets or animals.
•
Do not use the appliance to dry garments of
•
any kind.
To switch the appliance off, turn the program
•
selector anticlockwise to the 0 position..
SERVICE:
Make sure that the appliance is serviced only
•
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
Misuse or failure to follow the instructions may
•
be dangerous and renders the manufacturer's
guarantee null and void.
INSTRUCTIONS FOR USE

BEFORE USE:

Peel off appliance's protective film.
•
Make sure that all the product's packaging has
•
been removed.
Some parts of the appliance have been lightly
•
greased, consequently, the appliance may give
off a light smoke the first time it is used. After a
short time, this smoke will disappear.
Prepare the appliance according to the func-
•
tion you wish to use:

FILLING WITH WATER:

It is essential to have filled the tank with water
•
to be able to work with steam.
Open the lid on the filling spout.
•
Fill the tank, taking care to respect the MAX
•
level (Fig. 1).
Close the filling spout lid.
•
If, during ironing, the water tank runs dry, the
•
pump will automatically switch off after 25" to
30" to protect the micro-pump
If the appliance were to run out of water com-
•
pletely with the steam selector activated,
EN