Displays, Functions & Settings - Venta COMFORT PLUS LW15 Mode D'emploi

A
B
COMMISSIONING
A Fill lower housing 7 with tap water up to maximum WATERLINE marking and
add 50 ml hygiene additive 8 (complete content of bottle).
!
The device may never
be filled with the upper
housing in place!
B Insert disk stack 5 in lower housing 7 and place upper housing 2 on lower
housing 7.
C Connect mains plug of switching power supply 3 to the mains and switch on
device by briefly touching the power button in the display 1.
Only once the device is connected to the mains will the
i
power button  glow to switch the device on and off.
22 EN
!
C
i Adding the hygiene additive is
very important so that the air
is optimally humidified and
cleaned.
DISPLAYS, FUNCTIONS &
SETTINGS
1
2
3
4
5
Display Function
1 HUMIDIT Y Display humidity in the room.
2 rotational Display rotational speed 1 - 2 - 3.
speed
The following displays can be changed or switched on and off by lightly
touching them.
3 - and + rotational speed: - reduces and + increases the speed.
4 SLEEP Night mode
EIN: The device dims the display lighting and reduces the
rotational speed to 1.
rotational speed 2 can be changed manually with +
i
or - button 3 . Automatic operation 6 is not possible.
OFF: Bright display lighting and device runs with set rotati-
onal speed 1 - 3.
5 Power button to switch the device on and off.

3
6
EN 23