Connecting The Transmitter To A Loudspeaker; Connecting The Transmitter To A Scart Socket - HumanTechnik Earis Mode D'emploi

connection. The analog/digital switch on the transmitter's left side must be
set to "Analog".

Connecting the transmitter to a loudspeaker

The transmitter can pick up sound from a speaker via a microphone. This
microphone is not included and must be purchased separately from your
dealer. Only the "earis" microphone may be used.
Plug the microphone into the transmitter's green "Mic In" connector. Attach
the microphone to the speaker grill of your sound source.
Please note that the volume of your sound source has a direct influence on
the volume on the receiver. Please also note that this connection method
provides the least audio quality of all possible options.
The analog/digital switch on the transmitter's left side must be set to
"Analog".

Connecting the transmitter to a SCART socket

The SCART adapter is not included in the scope of delivery and can be
purchased from a specialist dealer.
Plug the supplied audio connection lead into the transmitter's blue "Analog
In" socket. Connect the SCART adapter with the audio connection lead.
Plug the SCART adapter into the SCART socket of your audio source. The
analog/digital switch on the transmitter's left side must be set to "Analog".
34 English
Earis_BA_DE_EN_F_NL_E_I_underchin180920.indd 34 20.09.2018 14:27:12