Pairing Transmitter And Receiver - HumanTechnik Earis Mode D'emploi

Pairing transmitter and receiver

For "earis" to function properly, transmitter and receiver must be paired. As
a rule, this has already been done during production and is carried out as
a standard on delivery.
However, if you want to use another receiver or perhaps have to replace
one later, it must first be paired with the transmitter.
A maximum of 2 receivers can be used simultaneously with one transmitter.
There are 2 possibilities to pair a receiver with the transmitter:
1. When inserting a new receiver into the charging dock of the transmitter,
they will be paired automatically.
2. Press and hold the tone control button until the status LED on the front
of the transmitter starts flashing rapidly.
Underchin receiver: Wear the underchin receiver to switch it on.
Pocket receiver: You must remove the pocket receiver from the charging
dock to turn it on.
Press the function button on the top of the receiver until the flashing status
LED on the transmitter lights up constantly. This indicates that transmitter
and receiver are now paired.
English 41
Earis_BA_DE_EN_F_NL_E_I_underchin180920.indd 41 20.09.2018 14:27:13