Care, Maintenance And Disposal - Beurer BR 60 Mode D'emploi

2. Place the Heating Plate of the device directly onto the area that has been
stung or bitten. Two application durations are available, depending on the
treated person's skin sensitivity:
- For the first use or use on sensitive skin, press the Pulse Button once for
a 3-second treatment time; half of the Ring Light will illuminate and the
treatment will start.
- For regular use on normal skin, press the Pulse Button twice quickly for
a 6-second treatment time. The Ring Light will illuminate fully and the
treatment will start.
3. Heat treatment will begin as soon as the Pulse Button is pressed. After
the selected treatment duration, the device will beep and the heating
plate and Ring Light will shut off. Remove the Heating Plate from the skin.

7. Care, Maintenance and Disposal

Battery Levels
When the battery level becomes low, the Status LED will flash and the
device will emit three short beeps. Replace both batteries as described in
the "To Set Up" section.
Cleaning and Storage
• Shut the device off and remove the batteries before cleaning.
• Clean the heating plate after each use with an alcohol-based pad/wipe.
Also clean the device between uses on multiple areas of the same person.
• Keep the device dry. Never place, store, or use this device near bathtubs,
showers, sinks, or other containers of water.
13