To Set Up; To Use - Beurer BR 60 Mode D'emploi

5. To Set Up

1. Slide the Battery Compartment open and insert two "AAA" size alkaline
batteries (included) into the Battery Compartment in accordance with
the polarity markings inside the compartment. Reattach the Battery
Compartment Cover by sliding it closed until it clicks into place.
2. Before beginning the treatment, make sure the device is clean, dry, and
intact.

6. To Use

Make sure the insect's stinger is no longer lodged in the skin. If needed,
remove the stinger carefully. Using this device immediately after the insect
bite/sting yields the best results. Waiting too long to treat the bite/sting will
enable itching and swelling to start and the insect bite healer will only have
a limited effect. Even if treatment cannot begin right away, do so as soon
as possible, as this will usually still alleviate some itching and speed up the
healing process.
CAUTION: Depending on the treated person's skin sensitivity, the heat
from the device may feel unpleasant and cause slight skin redness and, in
rare cases, irritated skin. If the heat function feels too hot, stop treatment
immediately.
1. Slide the ON/OFF switch to the "I" (On) position. The Status LED will
illuminate in blue, which indicates the device is ready to use.
12