Rotex RKRTR Manuel D'installation page 46

4.1. Set-up for Fahrenheit degree type
Refer to the operation manual how to change parameter in user
menu.
1st 2nd
code code
‚ 
4.2. Set-up for heating/cooling applications
For heating/cooling applications, set the following codes:
1st 2nd
code code
‚ 
4.3. Set-up floor temperature protection and dew
prevention function (only for floor heating/cooling
applications)
If EKRTETS is installed as floor temperature sensor it can be
used to manage and thus protect the floor temperature. Refer to
"Installation of EKRTETS as floor temperature sensor (only for
floor heating/cooling applications)" on page 3. When this function
is active the icon
In cooling mode, the dew prevention function will make sure
there will be no condensation on the floor. The dew point is
calculated based on room temperature and room humidity.
When the floor temperature drops below the dew point the
cooling demand will be temporarily stopped and the icon
displayed.
Installation manual
15
Description
Degrees type.
Description
Cooling mode present?
7
flashes below the ambient temperature.
Range
°C/°F
Required
setting
ÌlË
N
RKRTR + EKRTETS
Room thermostat
4PW56107-1
is