Setting Up Codes In The Installer Menu - Rotex RKRTR Manuel D'installation

4. Setting up codes in the installer menu

You can set up codes, starting from the time and date menu (in
advanced mode).
NOTE As a consequence of a customized configuration, it
is not abnormal that some codes are no longer
accessible.
1 Activate the advanced mode by pushing
seconds in OFF mode (
2 Navigate to the date and clock setting menu (
.
3 Press
during 10 seconds.
[
is displayed next to
4 Press
codes.
5 To modify codes, press
The value is flashing when being modified.
6 Press or
1 step.
To put a code back to its default value, press
the same time.
7 Press to save your selection.
You can exit this code menu by going to the "
pressing
Refer also to "Overview of all codes" on page 18.
RKRTR + EKRTETS
Room thermostat
4PW56107-1
&
).
and keep it pressed while now pressing
‚
.
or to consult the current settings of the
,

to increase or decrease the code value by
.

or .
Installation manual
during 5
)
) by pressing

and at

" code and
14