2.4 Using the Generic Actuator function
Press
to activate the Generic Actuator function (activation
*
of Art. 1256 or Art. 1259C).
The monitor will beep to confirm activation.
2.5 Using the Self-Ignition function
Press
to activate the Self-Ignition function.
The image from the corresponding external unit appears on the monitor.
By pressing
repeatedly, you can switch between the
external units (MAX. 2 if present).
*
Functions available in the factory configuration; to modify, see MONITOR SETTINGS AND PROGRAMMING, Page 9.
2.6 Using the Switchboard Call function
Press
A call is transmitted to the corresponding switchboard.
2.7 Using the Privacy function
Press
*
The red LED will light up to indicate that the function has been
activated.
FT PLANUX 01
to activate the Switchboard Call function.
to activate the Privacy function.
19
*
*
FT PLANUX 01