Mettler Toledo ICS226 Mode D'emploi page 14

14
Settings in the menu
F1.5.4 – Chain tare
Factory setting
Possible settings
F1.5.5 – Auto tare threshold
9 F1.5.1 = On
Factory setting
Possible settings
4.2.7 F1.6 – Digital filter
F1.6.1 – Digital filter
Factory setting
Possible settings
F1.6.2 – Stability
Factory setting
Possible settings
4.2.8 F1.7 – Display
F1.7.1 – Weighing unit
Factory setting
Possible settings
F1.7.2 – Resolution
If weighing unit (F1.2.1) is kg, the possible settings are below:
Capacity 3 kg
0.001 kg
Factory setting
Possible settings 0.0002 kg, 0.0005 kg 0.0005 kg, 0.001 kg 0.001 kg, 0.002 kg
4.2.9 F1.10 – Reset F1 parameters to factory settings
Resets all F1 parameters to factory settings, except the calibration and full capacity values.
On
Off
1d
1d ... maximum load
Middle
Low, High
Standard
Fast, Exact
kg
kg, g, lb, oz
6 kg
0.002 kg
15 kg
0.005 kg
ICS226 30232252A