Cleaning Of The Automatic Cappuccinomaker; Technical Data - La Pavoni DOLCE ESPRESSO Mode D'emploi

English
8
A
B
C
D
E
Picture 1
C
A
B
FIG. 3
13 – TECHNICAL DATA
Power supply: 230-240V 50Hz ; 120V 60Hz
Power: 950W
Warming time: about 6 minutes
Pressure pump: 15 bar
Tank capacity: 3 litres
Dimensions (HxLxD): 335 x 250 x 275 mm
Weight: 9,3 kg
• Unscrew the threaded nut (A) turning it anticlockwise until the steam nozzle
comes out (8).
• Clean the injector (D) in warm water to get rid of possible milk rests and clean
with a needle the hole of the steam nozzle.
After cleaning please assemble it as follows:
• Insert the threaded nut (A), the gummy rings (B) and (C) on the steam nozzle
(8), insert the injector (D) and screw the threaded nut (A) clockwise in order to fix the
injector.
• Insert the nozzle cover (E) pushing it upwards.
12.2 – CLEANING OF THE AUTOMATIC CAPPUCCINO MAKER
Apart from cleaning it every time it has been used, please clean it every now and
again more accurately (picture 3):
• Unscrew the threaded nut (A) turning it anticlockwise until the steam nozzle comes
out.
• Remove the cover ( D), the pin ( C ), and the pipe ( B ), wash then all in fresh water.
Rinse everything thoroughly with warm water to remove possible milk rests and
reassemble the Automatic Cappuccino maker again.
D
32