Hot Water; How To Set The Boiler's Temperature By Means Of The Pid; Routine Maintenance And Precautions; Cleaning Of The Turbo Steam Nozzle - La Pavoni DOLCE ESPRESSO Mode D'emploi

11.7 – HOT WATER
a) Make sure to follow the instructions as per 11.1 " starting of the machine".
b) Open the knob (4) and push the coffee/ hot water lever (15) on the position "I"; the turbo steam lever (6) pour
out immediately.
c) Fill the cup with the desired water and push the coffee/ hot water lever (15) on the position "0" and close the
knob (4).
d) After filling the cup, make sure that there is still water in the tank (1).
Attention: water temperature is around 90-95°, be careful not to burn yourself.

11.8 HOW TO SET THE BOILER'S TEMPERATURE BY MEANS OF THE PID

The PID has been set by the producer of this machine on a temperature of 95°C. In order to change the
temperature please proceed as follows:
- press the button
- as soon as the display shows the boiler's temperature, help yourself with the buttons
to set the desired temperature, starting from a min. of 80C° up to a max. of 133C°.
- after 3 sec. from pressing the last button, the inserted temperature is memorized and the display shows the set
temperature.
NB: if the temperature is set too high, once a coffee request is made, the display starts to flash.
The PID is already set by the producer on the right temperature for an excellent espresso. During heating and
coffee or water distribution, the temperature can oscillate (+/- 10/12°C). Also, a warning has been inserted:
after 108°C the PID's display shows the temperature but intermittently; this is normal and it warns the user that the
coffee will not be good if made with such high temperature.
12 – ROUTINE MAINTENANCE AND PRECAUTIONS
a) It is recommended to clean the tank periodically by pulling it out carefully by its proper handle and by putting
the water tubes into it again being careful not to bend them.
b) Clean up the steam tube and the frothing spout regularly. The spout can be removed by pulling it down.
c) Use a normal damp cloth to clean both the spout and the pipe.
d) Do not leave the machine outdoor.
e) Do not immerse the machine in water.
f) Use the machine only under adult control and keep away from children.
Attention: damages due to the emptiness of the machine water circuit voids war-
ranty; it recommended to read the instruction booklet carefully and to control the
tank (1) water level regularly.
12.1 – CLEANING OF THE TURBO STEAM NOZZLE
Always clean properly with a wet cloth the end of the turbo steam nozzle (6) after use to avoid its obstruction and
altering of the beverages flavour. Once every now and then clean it more specifically (picture 1):
• Remove the spout cover (E) pulling it downwards.
; as soon as the display shows the writing "PRG" press the button
31
English
;
and in order