Maintenance And Cleaning Operations; Steam Tube Cleaning; Cappuccino Automatic Cleaning - La Pavoni EUROPICCOLA Mode D'emploi

The base-mat is fixed to the machine with a special Torx type screw, to avoid tam -
pering with electrical parts; therefore, for any type of intervention and in case of
replacement of the power supply cable, please refer to the authorised SERVICE CEN -
TRES.
,
14 – MAINTENANCE AND CLEANING OPERATIONS
Before conducting any kind of cleaning operation, unplug the main cable from the
power socket without pulling the cable.
Clean regularly the filter holder (10), the filter basket (16), and the perforated filter
plate placed under the group (11) to avoid incrustations, and keep dry the drip tray
(8) and the drain well on the base to avoid water infiltration inside the base.
14.1 – STEAM TUBE CLEANING
To avoid altering the taste of the drinks to be heated and the clogging of the holes of
the steam pipe ending, clean carefully the steam pipe after every use.
14.2 –CAPPUCCINO AUTOMATIC CLEANING
Clean the Cappuccino Automatic after each use. Once in a while it should be cleaned
more accurately.
picture R
After having slipped the device out of
its seat, as described in section 10,
remove the Cappuccino Automatic
f rom its metal support (1 8) by
unscrewing the ring nut (26), which
should be turned anticlockwise, and
removing the silicon tube (20) from the
suction tap (25), picture R.
- Disconnect the spout-breaker (23)
from the milk-frother unit (24).
- Slip the milk suction tap (25) from the
milk-frother unit (24).
- Slip the regulation bar (19) out of the
tap (25).
Wash carefully everything under run-
ning water and reassemble the com-
ponents.
„‡
English