Lectrical Installation; Connection Options; Ydraulic Instalation; Filling Up The Boiler - Expobar New Elegance Mode D'emploi

13.1. Electrical installation:
Wiring of coffee machine must be done by qualified staff, always following the safety instructions:
•
Before plug in the machine, make sure the voltage of the supply mains corresponds to the ratings
indicated on the nameplate featuring the appliance's technical data.
•
The wall socket must be equipped with an earth contact. Make sure the earth system is efficient and
in conformity with current safety rules. It is compulsory to earth the machine.
•
You should protect the electric line of the installation with a magnetothermic switch appropriated for
the power consumption of the machine, specified on its nameplate.
•
A residual current circuit breaker must be installed in accordance with the characteristics of the
installation.
•
Check the characteristics & rating of the system and that the diameter of the cables are suitable for
the power absorbed by the machine.
•
Do not use any extension cable or plug adapter, nor multiple wall sockets.
The manufacturer is not liable for the injuries or damages on people and/or animals, as well as
damages on equipment, caused by a improper installation of the coffee machine.

13.2. Connection options

Consult the nameplate on your machine as to know which is the electrical characteristics of the machine type
that you have. Depending on it, you can connect your machine as follow:
CONNECTION OPTIONS
230 Vac
Machine:
230Vac Ph+N
Blue
NEUTRAL
Brown
Supply hose
PHASE
Yellow /Green
2Ph+N
Machine:
230Vac Ph+N
Blue NEUTRAL
Brown
Supply hose
PHASE
Black
Brown/Green
2Ph+N
Machine:
2Ph 230Vac
Blue
PHASE
Brown
Supply hose
Black
Yellow/Green
13.3. Hydraulic instalation:
Using the flexible hose provided with the machine, connect it to a stainless connection hose 3/8" male,
with by-pass valve. Placement of a water softener filter between the valve and the machine is compulsory
(among all the spare parts you should have another flexible hose of 50 cm in order to connect both water
softener filter and valve).

14. Filling up the boiler

In this kind of machines the filling is automatic; the machine will fill the boiler by itself

15. First Start up

1. Open the external supply of water to the machine.
2. Turn on the main power switch.
230 Vac
Supply Machine:
Supply hose
2Ph+N
Supply Machine:
Supply hose
2Ph+N
Supply
Machine:
Supply hose
PHASE
14
Supply
2Ph 230Vac
Blue
PHASE
Brown
PHASE
Yellow /Green
Supply
2Ph 380Vac+N
Blue
NEUTRAL
Brown
PHASE
Black
PHASE
Yellow/Green
Supply
3Ph 230Vac
Blue
PHASE
Brown
PHASE
Black
PHASE
Yellow/Green
Filling up the boiler
125 Vac
Machine: Supply
125Vac Ph+N
Blue
NEUTRAL
Supply hose
Brown
PHASE
Yellow/Green
380 Vac 3PH
Machine:
3Ph 380Vac+N
Blue
NEUTRAL
Brown
PHASE
Supply hose
Grey
PHASE
Black
PHASE
Yellow/Green
220 Vac 3PH
Machine:
3Ph 230Vac
Blue
PHASE
Brown
PHASE
Supply hose
Black
PHASE
Yellow/Green
Supply
Supply
English