Checking The Fuses - Mondial HPS125 CBS Manuel De L'utilisateur

7
Fuse box,1
A
6
1
2
Fuse box,2
A = Fuse box covers

Checking the fuses (

•
To avoid an accidental short circuit, set the ignition switch to
•
Before replacing the fuse, find and solve, whenever possible, the
problem that caused it the blow.
•
If the fuse is blown, replace it with one of the same current rating.
8
•
Turn the ignition switch to "
question to check the device operates.
•
If the fuse immediately blows, have a Mondial dealer to check the
electrical system.
NOTE
If the spare fuse is used, replace it with one of the same type in the
corresponding place.
CAUTION
Removing the 30A fuses requires the following functions to be reset:
5
digital clock, trip information and chronometer times.
Fuse specifications:
4
1. Main fuse 30A : Battery recharge,
2. Fuse
3. Fuse
4. Fuse
3
5. Fuse
6. Fuse
7. Fuse
8. Fuse
only HPS125 ABS ) :
" and turn on the electrical circuit in
15A : ABS motor
10A : ABS ECU
2A : Engine control unit (ECU),
30A : Spare fuse
2A : ABS starting
15A : Lighting
15A : EFI relay
73
MAINTENANCE
E
.