Coolant Fill In - Mondial HPS125 CBS Manuel De L'utilisateur

Euro 5
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Coolant fill in

Once the check is performed, if necessary add coolant; proceed as follow:
1. Remove the coolant reservoir cap.
2. Wait a few seconds so that any pressure in the system is purged.
CAUTION
Coolant is toxic if ingested and in contact with your eyes or skin may
cause irritation.
If it happens, rinse repeatedly with plenty of water and seek medical
advice.
If swallowed, induce vomiting, rinse mouth and throat with plenty or
water and seek medical advice immediately.
3. Turn the handlebar to the right.
4. Top-up the coolant until the liquid level reaches the upper notch at the
front of the coolant reservoir.
5. Do not exceed this level otherwise, the coolant will come out during
engine operation.
6. Refit the coolant reservoir cap.
7. Check the liquid level, as described above.
CAUTION
If there is an excessive coolant consumption or when the coolant
reservoir remains empty, check that there are no leaks in the circuit.
NOTE
For repairs, contact an official Mondial dealer.
67
MAINTENANCE
E

Publicité

Table des Matières
loading

Produits Connexes pour Mondial HPS125 CBS

Ce manuel est également adapté pour:

Hps125 abs

Table des Matières