In Case Of No Display, No Sound; Specifications - Alecto DVM-370 Mode D'emploi

6.11 IN CASE OF NO DISPLAY, NO SOUND:

– are the parent unit and baby unit switched off? (adapter connected, full
battery?)
– is the parent unit within range of the baby unit?
– is the baby unit switched off because no sound is being detected? (VOX)
– is the volume at the parent unit set to 0 (off)?
If the above is all in order, remove the adapters from the wall sockets, take the
•
rechargeable battery out of the parent unit, wait at least one minute and then
reconnect everything. Now, switch the parent unit and baby unit back on.
If you still receive no images or sound, please contact the customer service of
•
Alecto
7

SPECIFICATIONS

Range:
Parent unit power: 3.7V Lithium-Ion battery (incl.)
Baby unit power:
Frequency:
Display
Recharging time parent unit battery: ~ 6 hours *
Life-span parent unit battery: 6~7 hours *
*: the times mentioned above are estimates and depend on use and settings and
on the condition of the battery.
54
up to 50 meters indoors
up to 300 meters outdoors
model 055070. 3.7V, 1700mAh.
5.9VDC 800mA power adapter (incl.),
model: HX-AD059080-E02.
5.9VDC 800mA power adapter (incl.),
model: HX-AD059080-E02.
2.4GHz, digital frequency hopping (FHSS)
19 channels, auto selecting
4.3" TFT LCD display