Olimpia splendid CALDO CRYSTAL Manuel D'installation, Emploi Et Entretien page 45

g. Once finished, press button
h. After programming the first day, if it is desired to "copy" the same programming
for the next day, keep button
i. After programming is over, to activate the appliance for weekly functioning, press
button once; the "AUTO" icon will flash.
Press button
m. To disable the automatic functioning with weekly programming, press button
and select the desired functioning mode (except for AUTO); the selected icon will
flash.
Press button
Some temperatures, 19°C, 15°C, 7°C respectively, are preassigned to the SUN, MOON
and SNOWFLAKE functions.
It is possible to modify those values by operating as follows:
a. While the appliance is working, press button
b. Press it several times until you select the desired mode.
c. Keep it pressed for 3 seconds, until when temperature flashes.
d. Change temperature with buttons
e. Press button
to exit from the programming mode.
pressed .
to confirm your choice.
to confirm your choice.
or
to confirm your choice.
.
.
CALDO CRYSTAL
EN - 19