Olimpia splendid CALDO CRYSTAL Manuel D'installation, Emploi Et Entretien page 41

e1. Settings button
Press this button to set the functioning mode
fan only
minimum power
maximum power
f1. T button
Press this button to activate Turbo (BOOST) function
Display
g1. Set temperature value
h1. Fan only mode active
i1. Minimum power mode active
m1. Maximum power mode active
n1. Window/Door open function active (see paragraph 9.2)
o1. Temperature unit of measurement
p1. TURBO function active
q1. IONISER function active
8.2 - Remote control functions buttons
A remote control to ease the settings and the functions of the
appliance is supplied.
Some of these buttons are present on the appliance too.
At each pressure of a button of the remote control, the appli-
ance emits a "beep" to report the signal reception.
The selected and/or set functions are displayed through
the icons on the remote control display (see paragraph 8.3)
ON/OFF button
Press this button to turn the appliance on; the display
turns on.
Press it again to turn it off.
EN - 15
CALDO CRYSTAL