Olimpia splendid CALDO CRYSTAL Manuel D'installation, Emploi Et Entretien page 46

If enabled, the WINDOW/DOOR OPEN function allows the appliance to detect an
abnormal amount of cold air in the room.
In this condition, when the appliance is in heating mode and it's delivering heat, if
it detects a room temperature reduction by a few degrees, the function activates:
- the related icon
- the machine stops supplying heat
- the machine stops the fan functioning and closes the flap.
As long as the appliance doesn't detect a new increase in the room temperature,
heat supply remains interrupted.
If the appliance detects a rise in the room temperature, the appliance automatically
restores the previously set heating mode.
If this function is disabled, the appliance works normally.
If the function is active, it is possible to manually restore heat sup-
ply by working with the remote control buttons or with those on
board the appliance.
Each time the appliance is electrically connected, the WINDOW/
DOOR OPEN function is deactivated.
To enable the function:
a. When the appliance is connected to the mains power and in Standby mode, it is
possible to enable and disable the WINDOW/DOOR OPEN function.
b. Keep button
enabled.
c. Keep button
disabled.
EN - 20
9.2 - Window/Door open function
is shown on the appliance display and on the remote control
pressed until the appliance emits two beeps; the function is
pressed until the appliance emits one beep; the function is