arimar CLASSIC 270 Manuel Du Propriétaire page 111

WARNING
To clean the tubes DO NOT ever use high pressure water jet machines,
especially with hot water. The water jet machine can be used to clean
fibreglass components, paying attention to keep the water jet at least at
10/15 cm from the fabric.
NOTE
Repairs must be carried out using only glues and fabrics recommended by
"LALIZAS ITALIA s.r.l.".
NOTE
The repair kit supplied contains the necessary equipment for a temporary
repair. The interventions that can be performed by the customer are few,
both for technical and practical reasons. Definitive repairs must be
performed exclusively by authorized repair centres.
To know the nearest service department, go to www.arimar.com
NOTE
Inflatable boats should not be moored for long periods of time.
It is advisable to clean the hull periodically and to protect the fibreglass
parts by means of antifouling paint, paying attention not to touch the fabric.
SEPTEMBER 2021
111