Assembly Of Grass Catcher; Assembly Of The Handle - Elem Garden Technic TTPL41P-CC99 Traduction Des Instructions D'origine

2

ASSEMBLY OF GRASS CATCHER

a) Put the metallic frame inside the grass catcher
b) Fix the bag on the metallic frame.
c) Pull up the deflector and place the grass catcher at its place. fig B
3

ASSEMBLY OF THE HANDLE

Open out the handle and screw the handles parts with the
two screws and plastic nuts. Put the recoil starter on the Lift
of the handle and fix the cable with the plastic collar.
Introduce the rope of the recoil starter handle on its support
guide rope.
fig A
fig A
59