Software Version; Dmx Control - afx light PARLED100-Z Manuel D'utilisation

AUTO TEST
To select Test, press the ENTER button to show the TEST on the display and the unit will run a self-test. To go back to the
functions without any changes press the MENU button again. Hold and press the MENU button for one second or wait for
one minute to exit the menu mode.
Temperature Display
Select , press ENTER button and the display will show the temperature. To go back to the functions press the MENU
button.
FIXTURE HOURS
To select , press the ENTER button to show the FIXTURE HOURS on the display and the display will show the
number of working hours of the unit . To go back to the functions press the MENU button again.

SOFTWARE VERSION

, press the ENTER button to show the SOFTWARE VERSION on the display. To go back to the functions
To select
press the MENU button again.

DMX CONTROL

No need to turn the unit off when you change the DMX address, as new DMX address setting will be affected at once. Turn on
the unit, under the DMX signal, the LED will display the saved channel address (001-512).
Channel Mode：
©Copyright Lotronic 2018 PARLED100-Z 7