Changing The Factory Setting Of An Input Selector Button - Sony STR-SL50 Mode D'emploi

Remote Operations
Button
ANGLE DVD player
SUBTITLE DVD player
CLEAR DVD player
SEARCH DVD player
MODE
TV ?/1
TV
SWAP* TV
JUMP TV
-/-- TV
TV VOL TV
+/–
TV CH +/– TV
TV/ TV
VIDEO
WIDE TV
ALT Remote
* Only for Sony TVs with the picture-in-picture
function.
Function
To select viewing angle
or changes the angles.
Changes the subtitles.
Press if you made a
mistake when you press
the number button or
press to return to the
continuous play etc.
Select searching mode.
Press to select the unit for
search (track, index, etc.)
Turns the TV on or off.
Swaps the small and
large picture.
Toggles between the
previous and the current
channels.
Selects the channel entry
mode, either one or two
digit.
Adjust the volume of the
TV.
Select preset TV
channels.
Selects input signal: TV
input or video input.
Selects the wide picture
mode.
Change remote key
function to activate those
buttons with orange
printing.
Notes
• The above explanation is intended to serve as an
example only.
Therefore, depending on the component the above
operation may not be possible or may operate
differently than described.
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
• Before you use the V/v/B/b button for receiver
operation, press MAIN MENU. To operate other
components, press TOP MENU/GUIDE or AV
MENU after pressing the function button.
• The AUX and AAC BI-LING functions are not
available for set operation.
Changing the factory
setting of an input selector
button
If the factory settings of the input selector
buttons do not match your system components,
you can change them. For example, if you have
an CD player and you do not have a DVD
player, you can assign the DVD button to your
CD player.
1
Hold down the input selector button
whose input source you want to
change (for example, DVD).
continued
GB
33