Insert the bowl:
– Tilt the bowl forwards and then set
it down (1.),
– turn counter-clockwise until it locks
into place (2.).
Press the Release button and move
the swivel arm to position 3.
Hold disc holder at the lower end,
ensuring that the two tips are face up.
Carefully place the required slicing or
shredding disc onto the tips of the
disc holder. In the case of reversible
discs, ensure that the required side is
face up.
Grip disc holder at the upper end and
insert into the housing.
Attach the cover (note mark) and
rotate all the way in a clockwise
direction.
Place continuous-feed shredder on
the drive and rotate all the way in
a clockwise direction.
Plug the electrical cord into
a convenient nearby receptacle.
21