BRAND Transferpette S-8 Mode D'emploi page 46

Disassembling the Manifold
‘
’
( b )
“
46
6.
Remove the piston nut with piston
spring and pull out the piston.
7.
Insert the cleaned or new piston and
piston spring ( a ). Screw on the pis-
ton nut and tighten with the mounting
tool. Replace the stroke springs ( b ).
( a )
8.
Reassemble the manifold. The
manifold must be screwed counter-
clockwise into the handle so that it
audibly snaps into place.
Check the instrument for tightness,
mobility and accuracy (see page 42,
"Servicing").