Kreg KHI-SLIDE Guide D'utilisation page 8

7
INSTALLING A DRAWER AT THE BOTTOM OF A CABINET
Mounting Drawer-Slide Cabinet Members
• Place a ¼" [6mm]-thick, 1½" [38mm]-wide
spacer board that is as long as the drawer
slide between the bottom of the cabinet
and each drawer slide.
• For overlay drawer fronts, follow the
drawer-slide manufacturer's instructions
for the slide setback distance from the face
of the stile (for face-frame cabinets) or the
front edge of the cabinet side (for frameless
cabinets). For inset drawer fronts, add the
thickness of the drawer front.
• Using the vertical mounting slots in the
drawer-slide cabinet members as guides,
drill pilot holes and screw the cabinet
members in place.
Under-mount Drawer Slides
• Follow the drawer-slide manufacturer's
instructions for installing the drawer members.
FRAMELESS CABINETS
Spacer