Siebert SX102 Série Manuel D'utilisation page 33

Register address
The data are written from address 0040
Data format
The first two bytes (byte 0 and 1) contain the formatting of the characters to be
displayed (decimal point, brightness, flashing, blanking, display test):
7 6 5
: : :
: : :
: : :
: : :
: : :
: : :
: : :
: : :
: : 0 Flashing of the entire display off
: : 1 Flashing of the entire display on
: :
: 0 Blanking of the entire display off
: 1 Blanking of the entire display on (Priority over flashing)
:
0 Display test off
1 Display test on (Priority over flashing and blanking)
The following bytes (from byte 4) contain the ASCII characters to be displayed. The
number of these bytes depends on the character number of the units:
Units with 6 characters (SX102-06/18/0x-00x/0B-M0)
Byte:
Character: C6
Units with 8 characters (SX102-08/18/0x-00x/0B-M0, SX102-08/30/0x-00x/0B-M0)
Byte:
Character: C8
Units with 14 characters (SX102-14/18/0x-00x/0B-M0)
Byte:
Character: C14 C13 C12 C11 C10 C9
BAL SX102 MDB M 1.10
Byte 0
4 3 2 1
:
: C12 C11 C10
:
: –––––––– Flashing of individual characters (0 = off, 1 = on) –––––––––
:
0 Standard display brightness
1 Reduced display brightness
2 3 4 5
C5 C4 C3
2 3 4 5
C7 C6 C5
2 3 4 5
onwards.
h
0 7 6
C9 C8 C7
6 7
C2 C1
6 7 8 9
C4 C3 C2 C1
6 7 8 9
C8 C7
Byte 1
5 4 3 2
C6 C5 C4 C3
10 11 12 13
C6 C5 C4 C3
1 0
C2 C1
14 15
C2 C1
33