Table des Matières
Publicité
Sakai
Insert
X-20F
Steel chimney
Can be connected to steel chimney.
Weight including insert:
Sakai collorado white / gray concrete
Sakai Steel Grate
Floorplate
Please follow the rules and regulations regarding
floor plates in your country.
Illustration (FIG 1 Sakai=mm)
*The illustration indicates the approximate centre height
of the hole for the flue. Consider possible inclination of
the flue prior to perforating the chimney. Distortions in
floors and walls may influence the height. Dry stack
the fireplace for accurate height and positioning of
the flue/chimney connection. If a fresh air supply set
(accessory) is connected through the floor, mark where
the hole should be.
Fresh air supply (accessory)
ATTENTION! The product can only be connected to
the fresh air supply through the pre cut areas in the
surround (See FIG 1a, Sakai =AIR). Seal off the gap
between the fresh air hose and the concrete with a
non combustible sealant, Rockwool etc
For more information see separate assembly
instructions for fresh air supply.
Safety Distances (FIG 2)
Ensure that the safety distances are complied with.
Please note that these safety distances can vary from
country to country.
Assembly tools - page 4
Appliance dimension & flue gas connections
position (FIG 1a, Sakai =mm)
Air connctions - (FIG 1b, Sakai =mm AIR)
Assembly instructions (FIG 3-19)
222 kg
192 kg
GB
9
Publicité
Table des Matières
