Programme Sequence; Premature Programme Abort; Cleaning And Maintenance; General Instructions - Dreve EyeVolution MAX Mode D'emploi

EyeVolution ® MAX

7.3 Programme sequence

Each time program starts up with the
intensity of the LEDs reduced by 50 %
to ensure polymerisation is as tension-
free as possible. The LEDs automati-
cally switch to 100 % output after 30 s.
Important: In order to protect your
eyes, polymerisation is only possi-
ble when the device cover is closed.
The light used is not suitable for direct
eye contact and can cause retinal dam-
age over the long term when unfiltered.
The cover features a light-filtering
inspection window (13) to facilitate
visual inspection of the polymerisation
process. An on-going time programme

7.4 Premature programme abort

An on-going time programme can
be ended and deleted at any time by

8. Cleaning and maintenance

Always remove the mains plug from
the mains power supply before carrying
out any cleaning or maintenance work.
Ideally, the device is cleaned using a
soft cloth, possibly a slightly dampened
sponge and a mild resin-cleaning
24
is always interrupted by opening the
cover (12); the LED assigned to the
respective programme flashes. The
time remaining is saved in the electron-
ics module and continues once the pol-
ymerisation chamber is closed again.
Once a time programme is complete,
2 brief signal tones sound and the
polymerisation LEDs and rotary motor
switch off automatically. The green
LED indicating the programme on the
operating foil (3) is also deactivated. A
ring of 6 white LEDs stays active and
is only dimmed down after the device
cover is opened.
pressing the activated programme key.
agent. Water and cleaning agent must
not penetrate the device.
The LED circuit board (9) must not
come into contact with damp materi-
als. Minor soiling can be removed using
a soft brush.

9. General instructions

Repairs and maintenance work on the - operation is only by qualified person-
EyeVolution® MAX polymerisation nel.
device may only be carried out by quali- - the device is used in accordance with
fied personnel. In any case, the power these operating instructions.
supply to the device must be interrupted. - extensions, new settings, modifications
The Dreve Group is only responsible for or repairs are only carried out by per-
the safety, reliability and performance sons authorised by Dreve Dentamid.
of the device when: As we constantly strive to develop our
- the device is only used for the corre- products, we reserve the right to make
sponding designated application technical modifications.

10. Decommissioning

The DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE) lays
down measures to protect the environment and human health. Waste electrical
and electronic equipment marked as such may not be disposed of as unsorted
municipal waste within the European Union. For detailed information regarding
the professional disposal of WEEE please contact Dreve or your distributor.

11. Warranty

The manufacturer warranty is 2 years in the case of changes or repair and
from date of delivery. The warranty right maintenance work which have been
(liability of defects) is not limited by the incorrectly completed by the purchaser
warranty and is regulated in the gen- or third parties as well as in the case of
eral terms and conditions of the com- the breaching of the seals. All technical
pany Dreve. The guarantee includes the changes to the machine are prohibited
assumption of repair and shipping costs and will result in the loss of the warranty
in the case of material and manufactur- claim. Repairs may only be performed
ing defects. The warranty claims do not by trained personnel of the company
refer to natural wear nor to damages Dreve. For cases of repair, please con-
which are the result of the transfer of tact the company Dreve, Max-Planck-
risk due to faulty or unintended use, Str. 31, 59423 Unna / Germany; Phone:
excessive loading, unsuitable equip- +49 2303 8807-0. After the sending-
ment and any such chemical, electro- in of the product and the submission
chemical or electrical influences which of the sales receipt, the product will be
are not provided in accordance with the repaired free of charge or replaced by
contract. Warranty claims are excluded a comparable product.
25