Kit Includes; Tools Needed - Petsafe Pet Door Guide D'installation

Kit includes

Closing panel
Screw sleeves
• Medium 4 pcs.
• Large 4 pcs.
• X-Large 6 pcs.

Tools needed

• Tape measure
• Level
• Pencil
• Hammer and slotted screwdriver (if removing door from
hinges to install pet door)
• Scissors
• Masking or painter's tape
• Drill
• 1/2-in (12-mm) drill bit
• 1/4-in (7-mm) drill bit
• Jigsaw (or keyhole saw) with appropriate blade for the
material you will be cutting
• Phillips screwdriver
• Wire cutters
• Caulk
• Safety glasses
NOTE: Although the instructions in this guide explain how to install the pet door in a door, it can also be installed in
most walls; the installation procedure is the same. The pet door is not designed to be installed in glass. If installing
the pet door in a door or wall with a thickness of:
• More than 2 inches (51 millimetres), you may need additional tools and materials, such as wood framing.
• Less than 1 1/2 inches (38 millimetres), you will need to purchase an Installation Adaptor. Visit www.petsafe.com
or contact Customer Care.
4
Interior frame
Nylon screws
• Medium 4 pcs.
• Large 4 pcs.
• X-Large 6 pcs.
petsafe.com
Exterior frame
Metal screws
• Medium 4 pcs.
• Large 4 pcs.
• X-Large 6 pcs.
Cutting template