Kit Includes; Tools Needed - Petsafe HPA11-10888 Guide D'installation

Kit Includes

Tools Needed

Hammer
Jigsaw
Slotted & Phillips
Screwdrivers
NOTE: The Big Cat Door can be installed in most doors and walls. Installation in thinner or thicker
applications may not require the plastic core covers and tunnel support. Additional skills, tools and materials
(such as wood framing and hardware) may be required. It is not possible to cut holes in tempered or double
pane glass except at the time of manufacture. Consult a professional glazier or glass manufacturer to install
the pet door in a glass door or window.
Want Professional Installation Help?
Invisible Fence Brand installers (where available) may come to your home and install your new PetSafe
®
Door for an additional cost. Contact the Customer Care Center at 1-877-866-DOGS (3647) or visit the
website at www.invisiblefence.com for more information.
4
½" (13mm)
Drill Bit
Drill
Scissors
Pencil
Hacksaw
Customer Care Center 1-800-732-2677
BIG Cat Door
Cutting Template
Tools Needed
Center Line
Non-Glass Door Template
Shoulder Height
1¹³⁄ " (46mm)
Center Line
NOTICE
It is not possible to cut holes in tempered or double
pane glass, except at the time of manufacture. Consult
a professional glazier or glass manufacturer to install
the pet door in a glass door or window.
NOTICE
When applying cutting template there should be a
minimum of 3"between the bottom and sides of the
door and the outer edge of the cutting template to
maintain the structural integrity of the door.
9"
(228mm)
Center Line
Tape Measure
Level
Safety
Equipment
Optional
Masking or
Painter's Tape
•Duct Tape
•Caulk
Shoulder Heigh
t
9¼"
(235mm)
Pet
®