Transportation Of The Machine - Robland D 630 Mode D'emploi

Transportation of the machine

(Fig.1-1.1)
Depending the method of transport or shipping, you will receive the machine in a crate or on transport
blocks. Remove the sides of the crate and cover and put the hoisting hooks as shown in fig, 1and 1.1.
The machine can be lifted with a small crane, or a forklift, but severe shocks must be avoided. Place
the machine on a concrete base, and level the machine perfectly horizontally in both directions. The
machine is construted in such a manner that it is not necessary to fix it to the ground, but if you wish
to do so, fixing bolts must be introduced through the leveling bolts in the base plates. Please find the
dimensions of the base plate in the technical data drawing.
Fig.1 Fig.1.1
44
V1112 D 630
Nederlands Français English Deutsch