Safety And Maintenance Instructions; Safety Instructions; Danger List - Robland D 630 Mode D'emploi

Important instructions
when ordering spare parts
Always mention the following items on your order:
- Type of machine
- Serial number from manual
- Part number and quantity
- Your reference and correct phone and fax number
Attention
Working with woodworking machines can be extremely dangerous if the safety instructions are not
followed. It is recommended you systematically use the safety equipment installed on the machine.

Safety and maintenance instructions

Woodworking with machinery is a pleasant job that will give you a lot of satisfaction. Nevertheless,
working with a machine requires constant attention and care. Therefore, for your own safety, pay
attention to the instructions summarised in this chapter.
- The machine can only be used safely if the operator strictly follows the operating and safety
instructions.
- It is absolutely essential to read this manual before using the machine so you know how the
machine works and what its limitations are.
- Always make sure that all safety devices are fitted to the machine and that the machine is
connected to a dust extraction system.
- Provide sufficient space around the machine and good lighting in the workshop.
- When changing the tools or when doing a maintenance job, the machine must always be
disconnected from its power supply.
- Knives and tools which are not correctly sharpened or are in bad condition not only diminish the
quality of the work, but also increase the risk of accidents.
- Always wear suitable clothing. Loose or torn clothes are very dangerous.
- Keep children away from the machine and the workshop.
- To avoid damaging your hearing we recommend you wear ear protection when working with the
machine.

Danger list

This list was based on parts 1 and 2 of EN 292 and annexe A of part 2.
D 630 V1112
Deutsch English Français Nederlands
39