Technical Specifications - Robland D 630 Mode D'emploi

Technical Specifications

Voltage
Motor power
Motor power up and down table
Motor power feeding
Weight
Total weight machine crated
Dimensions machine crate LxWxH
Diameter cutter block
Knives
Dimensions knives
Cutter block speed
Maximum chip removal single pass
Serrated infeed roller
Outfeed rollers
Sectional infeed roller
Rubber rollers
Chip breakers and pressures (hold down) on both in-and outfeed
TERSA cutter block, reversible knives
Dimensions thicknesser table
Thicknesser capacity
Variable feeding speed by frequenty variator m/min
Friction reduction rolls in the thicknesser table
Digital read-out thicknesser
Rise and fall thicknesser table 2 speeds slow/fast
Safety micro switch on hood
Dust suction outlet
Machine CE
3 V-belt main motor drive system
Double drive chains and sprockets on all arbors and chain tensioners
Double bearings on main cutter block, and in-and outfeed rollers
Magnetic knive setter
Thicknesser table extension, with automatic height drive system
Automatic "Star-Delta" starter for 7,5 kW and 11 kW motor
D 630 V1112
Deutsch English
V 400 / 230
kW 5,5 option 7,5 and 11
kW 0,55
kW 0,75
kg 950
kg 1100
mm 1590x1340x1235
mm 120
4
mm 630x30x3
RPM 5200
mm 8
1, diameter 70 mm
2, diameter 70 mm
1 OPTION
2 OPTION
standard
OPTION
mm 630x1160
mm 300
from 5 to 22 m/min.
standard
1 or 2 OPTION
standard
standard
standard
mm 160
standard
standard
standard
standard
standard
OPTION
OPTION
Français Nederlands
43