GE Xcellerex XDUO Quad Single-Use Mode D'emploi page 363

Element
State
Current Value
Class
Type
Priority
Xcellerex XDUO Quad Single-Use Mixeur Mode d'emploi 29-0885-07 AA
Description
Displays the current state of the alarm. The following states are
possible:
UNACK: The parameter that is in alarmed state and has not
•
been acknowledged by the user. The text blinks alternately in
red and green color.
UNACK_ALM: The parameter that is in alarmed state and has
•
not been acknowledged by the user. The text is displayed in
steady red color. This state is visible only in Alarm History
window.
Remarque :
UNACK_ALM refers to an unacknowledged alarm that has di-
sappeared from Alarm Summary window because the user
has disabled the alarm while it was in an alarmed state. Prior
to disabling the alarm, the user did not acknowledge it.
UNACK_RTN: The parameter that was in alarmed state at
•
some time point but has now returned to normal state. It has
not been acknowledged by the user. The text is displayed in
steady blue color.
ACK: The parameter that is in the alarmed state and has been
•
acknowledged by the user. The text is displayed in steady
black color.
Displays the current value of the parameter.
Remarque :
This information is displayed only in the Alarm Summary window.
The following classes are possible:
Discrete alarms (for example on/off alarms)
•
Value alarms (deviation from a parameter level)
•
Displays the codes for alarm condition. For detailed explanation,
see the table below.
Characterizes the severity of the alarm. The priority range is 1-
999. The highest priority is 1.
Remarque :
E-Stop Active is a priority 1 alarm. All other alarms on the system
are priority 500 alarms.
B User interface description
B.1 User interface: windows
B.1.5 Alarm Summary and Alarm History
363