GE Xcellerex XDUO Quad Single-Use Mode D'emploi page 349

Active objects
Active objects are found in the Mixer0X window. Active objects allow the user to access
and modify the state of the process. Clicking the object opens a dialog box and allows
the user to manage process control.
Active objects that are connected to PID control loops can also be used to change the
control mode of the displayed component between Auto, Local, Remote, and Manual.
The following illustration is an example of an active object.
PID loop overview displays
PID loop overview displays are shown in the Mixer0X window. Clicking on a PID loop
overview display opens the relevant PID faceplate. The following illustration is an example
of PID loop overview display.
Part
1
2
3
4
5
Xcellerex XDUO Quad Single-Use Mixeur Mode d'emploi 29-0885-07 AA
1
2
3
4
5
Name
PID loop denotation
Process Variable (PV)
Setpoint (SP)
Control Variable (CV)
Unit
B User interface description
B.1 User interface: windows
Function
The tagname of the parameter
The actual measurement of the parameter
The target value of the parameter
The controller output
The unit of measurement of the parameter
B.1.1 Mixer0X
349