Audio Pro Living LV2 e Manuel D'utilisation page 8

use multiple transmitters and speakers
simultaneOusly with the hOuse COde 1, 2 and 3
transmitter: house Code 1
speaker: house Code 1
By using the house Codes (channels) you can share the wireless network for up to three separate
networks. then you can simultaneously play music from various audio sources (from three different
transmitters) to different pairs of lv2e speakers in the same house or apartment.
adJust the vOlume separately in three
diFFerent ZOnes
in order to be able to have the same music at different volumes in different rooms/areas, you can
divide each house Code into 3 different volume zones. each zone can have a different volume.
this is very handy if, for example, you want to have one volume level in the living room and a lower
volume in the kitchen. you can have as many lv2e speakers in each zone as you want, or just a pair.
the zone volume is easily controlled with the remote unit.
hOuse CODe 1
speaker and transmitter set to
same house Code (channel).
Zone a
3 2
Zone volume
Living LV2e
Note:
1. All LV2e speakers are default Zone A, and volume level 17.
2. Each House Code (1, 2 and 3) can be split into up to 3 zones (A, B and C).
3. You can have as many speakers you like on each House Code, and as many as you want in each zone.
A zone does not have to be one room, can be whole floor in house.
transmitter: house Code 2
speaker: house Code 2
Zone B
0 8
Zone volume
Living LV2e + LV-SUB
transmitter: house Code 3
speaker: house Code 3
Zone C
1 5
Zone volume
Living LV1 + LV2e + LV3