Important - Ricatech RMC100 Mode D'emploi

USB & SD Card operation
SD Card Operation:
1. Switch the unit ON by turning the power ON-OFF SWITCH/VOLUME CONTROL switch to the ON
position.
2. Turn the VOLUME control to mid-range position.
3. Slide the FUNCTION Switch to " CD " mode.
4. In " STOP " mode Press and hold STOP /
If no Card has been detected, " NO CARD " will show on the Display.
CARD
5. Insert an SD Card with pre-recorded MP3 music (not supplied) into the card slot. "READ" is then
displayed as the system scans the contents of the SD Card.
CARD
6. Track no. 1 of the Root folder (Folder 1) will play back automatically after reading the SD card
contents.
7. Press the FORWARD SKIP /
track number appears on the display. Release the button – the track will start playing automatically.
to stop playback and press PLAY/PAUSE/
8. Press STOP /
9. To pause the music, press PLAY/PAUSE /
USB Operation :
1. Switch the unit ON by turning the power ON-OFF SWITCH/VOLUME CONTROL switch to the
ON position.
2. Turn the VOLUME control to mid-range position.
3. Slide the FUNCTION Switch to CD mode.
4. In " STOP " mode Press and hold STOP /
5. In Stop mode, press STOP /
SD>USB. If no USB has been detected, "NO USB" will show on the Display.
USB
6. Plug-in a USB mass storage device. " READ " is displayed as the system scans the contents of the
USB device.
USB
7. Track no. 1 of root folder (Folder 1) will be played back automatically after the USB device contents
has been read.
USB
MP3
8. Press the FORWARD SKIP /
track number appears on the display. Release the button - the track will start playing automatically.
to stop playback and press PLAY/PAUSE/
9. Press STOP /
10.To pause the music, press PLAY/PAUSE /
NOTES:
· The USB Port does not support connection with a USB Extension Cable.
· It is not designed for direct communication with a computer.
· It is not guarantee that all USB memory devices (or SD cards) will work on this audio system

IMPORTANT:

Do not disconnect the USB device during USB mode, as this may damage the external device or its
files. Please power off first or select another Mode before safely disconnecting the USB device.
for over half a second – this will switch from CD>SD .
or BACKWARD SKIP /
, press it again to resume play.
for over half a second – this will switch from CD>SD .
and hold the key for over half a second - this will switch from
or BACKWARD SKIP /
, press it again to resume play.
once or repeatedly until the desired
to resume play.
once or repeatedly until the desired
to resume play.