Deleting Mp3 Tracks - Ricatech RMC100 Mode D'emploi

MP3 Recording
Recording from CD to USB / SD
The system is capable of converting (encoding) a whole Audio CD into MP3 format and copy/record
this to a USB mass storage device (e.g. a Flash Drive) or SD card (not supplied). It can also copy a
single MP3 track to/from a USB device or SD card.
1. In CD playback mode, press REC /
(the default is USB if both devices are detected), playback will stop and skip back to the beginning
of the current track, the system will scan the contents of the USB/SD Card and create a folder to
store the MP3 Tracks in. Resume CD playback and ripping will start from that moment. " USB " or "
CARD " will start flashing, depending on the device selected.
2. Press STOP / to exit CD ripping.
MP3 CD/USB/SD Copying
1. In MP3-CD, USB or SD Card playback mode, press REC /
to USB or SD card, USB to SD Card and SD Card to USB. Playback will stop and the system will
scan the contents of the USB or SD card and create a folder to store the MP3 tracks in.
2. " REC " will show on the display.
3. " COPY " will be displayed.
4. Either "USB" or "CARD" will start flashing, MP3 copying starts, the process will stop when copying
has finished.
5. The current MP3 track will play back from the beginning.
Recording from Phono to SD / USB
The system is capable of converting an audio signal from PHONO input (record player) into MP3
format and store it on a USB mass storage device or SD card (the default is USB if both devices are
detected). Prepare for playing a record, as described previously.
1. Slide the FUNCTION button to PHONO mode, place a record on the turntable and start playing it.
to start ripping(recording), the system will scan the contents of the USB or SD card
2. Press REC /
and create a folder to store the MP3 tracks.
3. " REC " and " TO" are displayed on the LCD for about 15 seconds, " USB " starts flashing.
4. Either " USB " or " CARD " starts flashing as Recording begins.
5. Press STOP / to exit PHONO Recording mode.

Deleting MP3 tracks

The system can delete previously recorded MP3 or existing files on either USB device or SD Card.
1. In USB or SD card playback mode, press and hold REC / for 2 seconds, the currently playing track
is stopped and will be deleted.
2. " DELETE " is displayed.
to start ripping (recording) to USB/SD card
to start MP3 copying from MP3-CD