Cd Player Operation - Ricatech RMC100 Mode D'emploi

Accessory supplied
Spindle Adaptor for 45 rpm records
To play a 45rpm record with the centre clip missing, remove the adaptor from
the record player deck by placing thumb & forefinger in the recesses and
pulling it upwards, then place it on the Turntable
Spindle. The record can then be placed on the turntable.

CD Player operation

Playing a CD
1. Switch the unit ON by turning the power ON-OFF SWITCH/VOLUME CONTROL switch to the ON
position and turn the Sound Volume to mid-range position.
2. Slide the FUNCTION Switch to CD mode.
3. Press CD OPEN / CLOSE /
4. Insert a pre-recorded compact disc with the printed side facing up. Press CD OPEN / CLOSE /
again to close the compartment, " READ " is displayed as the CD player scans the contents of the
disc.
5. Track no. 1 will start playing back automatically after the CD Player has finished reading the
contents of the disc.
6. Press FORWARD SKIP /
number appears on the display.
ESP CD
or the " STOP/SD/USB " key (marked with a red dot) to stop playback.
7. Press
or the " PLAY/PAUSE " key (marked with a green dot) to resume play or pause the music.
8. Press
MP3-CD Disc Playback – by Remote Control
1. Insert an MP3-CD format disc. Press CD OPEN / CLOSE /
READ " is displayed as the CD Player scans the contents of the disc.
CD
2. Track no. 1 in the Root Folder (Folder 1) will start playing back automatically after the MP3-CD disc
contents has been read.
CD MP3
ESP
3. Press FORWARD SKIP /
number appears on the display.
4. Press STOP / to stop playback.
CD
5. In Stop mode, press and hold the PLAY/PAUSE key /
NOTE: In Stop Mode: For faster skipping forward or backward of 10 tracks at a time,
press and hold the FORWARD
SKIP / or BACKWARD SKIP /
to open the CD Compartment.
CD
or BACKWARD SKIP /
CD
or BACKWARD SKIP /
button. This stops when the button is released.
once or repeatedly until the desired track
again to close the compartment. "
once or repeatedly until the desired track \
to select the MP3 folder.