Video Options; Other Settings - Kerbl IPCam Pet Mode D'emploi

2.7 Video options

Horizontal cruise
Vertical cruise
Preset position
Full screen
Sound off (no function)
Sound on (no function)
No communication (no function)
Communication (no function)
Snapshot
Record
2.8 WLAN setup
Click the symbol on the right next to the camera to activa-
te the settings. Click „Setting" and „WiFi Setting".
The available WLAN routers are listed. Choose a router
and enter the password (WPA or WPA2). Once you have
confirmed this by clicking the „OK" symbol, the WLAN
network is set up. Now disconnect the camera from the
RJ-45 cable. The camera will dial in and connect
automatically to your network.

2.9 Other settings

Delete camera: Select the camera and sliding it with the
finger on the touchpad to the left causes „Delete" to
appear. Tap it and the camera is deleted.
Reset to factory settings: Hold the reset button for
around 15 seconds.
Video history: Tapping „history records" allows you
to list videos that have been stored locally and on the
SD card.
Version update: Tapping „Firmware upgrade" searches
for new versions of the software.
The application supports settings for the alarm, saving,
password changes, firmware updates, image quality
(brightness, contrast, mirroring, infra-red options).
The commands are self-explanatory thanks to the icons
and are easy to understand.
28