Kerbl IPCam Pet Mode D'emploi page 27

2.5 WLAN setup
Click the „House" icon at the top left and the main menu
appears. Clicking „Device Management" gives you a list
of all the cameras that have been installed on the network
via LAN cable.
Click the „>" symbol on the right next to the camera to
activate the settings. Click the blue „WiFi" icon to display
the WLAN networks available.
Choose a router and enter the password (WPA or WPA2).
Once you have confirmed this by clicking the „OK" sym-
bol, the WLAN network is set up.
Now disconnect the camera from the RJ-45 cable.
The camera will dial in and connect automatically
to your network.
2.6 Add a camera with the software
from the Google Playstore
Note: The user interface can look different in newer
versions of the application. Please contact our support
team if required.
Scan: Click „Scan" and allow your smartphone to scan
the QR code. If you hear a beep, the code has been scan-
ned in and the unique camera number (UID) appears in
the relevant field.
LAN search: Click „Search" to find the camera on the
network. The default password is 888888 and the user-
name is admin. Change these details as soon as you find
the camera in order to protect your privacy as effectively
as possible
Manual entry of the UID code: You can also enter the
UID manually. Please note that the entry is case-sensitive.
Once you have successfully installed the camera, click the
relevant icon and the camera appears.
27