(En) Introduction - Kerbl IPCam Pet Mode D'emploi

(EN) Introduction

Please read these instructions carefully in their entirety before using the product, and keep them handy for
future reference.
Thank you for your interest in our product and for ordering the IPCam. It can be controlled using any PC/laptop via the
Intranet or Internet via a common web browser (recommended: Internet Explorer or Safari), via smartphone (iPhone, iPad,
Android phone and pad) or via the client software installed on the PC. It can be easily integrated into your LAN or WLAN
environment via a user-friendly installation process and intuitive interface. We are certain that you will value the quality
and features of this product.
Note
This product can interfere with other wireless devices that
use the 2.4 GHz ISM band. Please turn off these devices to
avoid interference.
Product safety
This product transmits electromagnetic waves just like
other wireless products. Its signal power, however, is less
than other wireless devices, for example, mobile phones.
During operation, IPCam meets the safety standards for
radio frequencies and the recommended indices.
Restrictions
1. Do NOT use this product to violate the privacy rights
of others. Monitoring the activities of other people
without their consent is unlawful. This product was
not designed or manufactured for this purpose.
2. Do NOT place this product in proximity to medical
devices. Radio waves can cause the malfunction of
electronic medical devices.
3. This product should be kept at least 30 cm away
from all pacemakers. Radio waves can interfere with
pacemakers.
4. Do NOT use this product for unlawful activities.
The user must ensure that the camera is only used
in accordance with the law.
Care and maintenance
1. Make sure that the camera and its power supply
has sufficient ventilation;
2. Do not shake, hit or allow the product to fall to
the ground;
3. Make sure that the camera remains dry and dust-free,
and is not exposed to direct sunlight;
4. Do not place this product in proximity to magnetic
objects;
5. Do not place the product in locations that have
constant temperature or humidity fluctuations;
6. Keep the product away from heat sources;
7. Do not use this product in proximity to aggressive
chemicals;
8. Do not place this product in rooms that are surroun-
ded by metal. The surrounding metal can shield
electromagnetic waves so that no signal is received;
9. Please note the local environmental protection
regulations of your area;
10. Please turn the device off when not in use;
11. Do not take the product apart and do not attempt to
repair it. This can damage the product.
22