Operating The Camera - Kerbl IPCam Pet Mode D'emploi

Select WiFi: Clicking this button allows you to list the
WiFi networks available with a click on „Find signal".
Select the appropriate network, click „Set" and enter, if
requested, the WPA or WPA2 key. This is often found on
the underside of the router. After successfully setting up
the WLAN network, the following message appears
Confirm with „OK". The camera is now successfully set
up! Now disconnect the camera from the RJ-45 cable.
The camera will dial in and connect automatically to your
network.

3.1 Operating the camera

• Display of the added cameras
• „+": Add camera
• „-": Delete camera
• „Cogwheel": This is where you can set recording
and alarm functions
• Select menu for the number of cameras that are to be
displayed in the summary window. The setting from left to
right: Single camera, 4 cameras, 8 cameras, 16 cameras,
manual setting, full screen
Start all: Bring all cameras online simultaneously
Stop all: Take all cameras offline simultaneously
Options: Settings for memory functions,
on-screen display and other details
Video: Access to saved videos
Alarm: Access to videos that were triggered
due to an alarm
Settings: Change password, search for software
updates
30